How To Remove Bottom Of Ps4

Why are we making this guide? Sometimes when people wall mountain their PS4 the grit shifts and causes the fan to run noisily. We've made this guide to assistance people maintain the health of their console, enjoy!

What you'll need:

Tamperproof bit set (TR 9 Torx security chip)
Screw commuter
Can of air

Skip to:

PS4 Slim
PS4 Pro

Original PS4 Body:

This section is for the PS4 Chassis that was released in September of 2022. The older version of the console has guides up everywhere. Nosotros decided to feature the newer PlayStation 4 model CUH-1200 in this guide. The panel has a lilliputian bit dissimilar of an assembly so this guide will exist helpful for those of you with the new build style.

Step 1. Remove the single screw on the back

There will be a single screw underneath a shiny sticker at the center of the console, on the aforementioned 'layer' as the power port. Remove that sticker to reveal a 5-point star tamperproof screw. You're going to want to tamper with that bad boy; which will void your warranty (which if y'all've congenital upwardly enough dust to need to clean your PS4, it is probably expired anyways.)

Step 2. Lift off the lesser cover

Take off the bottom cover. This is tougher than it sounds! This panel is really on at that place, the best way to exercise it is pull upwardly very hard on each side of the cover, near the back of the panel. You might accept to experiment with where putting force per unit area makes it easiest to remove. You can crack the bottom plate doing this, so be careful! It will come off without whatever damage when done carefully.

Step three. Remove the circled screws

Although it'south tempting to merely terminate now that yous can come across the fan, don't. You're just a few screws away from getting access to the heat sink. Unscrew the ii Philips head screws on the metallic plate, and the 3 five-betoken star tamperproof screws. This volition let you pull out the ability supply.

Step iv. Remove the power supply

Sneak your fingers betwixt the case and the power supply and pull out the ability supply. Continue the power supply completely level while doing this to avoid yanking out the power supply cord. If you're conscientious there won't be any issue removing information technology without e'er having to unplug that supply string.

Step v. Cleaning

Now yous have full access to the essential cooling elements of the PS4. Spray air through the fan blades, but also through the heat sink (metallic grate looking part) which was just exposed by removing the power supply. Once it's all put back together you lot should find your PS4 running noticeably quieter.

PS4 Slim:

Step 1: Remove the pinnacle cover

In that location are no screws so the cover comes off fairly easily exposing the fan right away. You could but stop hither, which is slap-up for a quick cleaning merely, after a while you're just blowing more than dust into the panel. We kept going.

Step 2: Unscrew all of these

At that place are a lot of screws here. Once you lot remove all the screws circled in the image above you volition be able to lift upward the metal encompass giving yous additional access to remove dust defenseless upwards in the heat sink.

Stride 3 Tilt up the interior embrace

Information technology won't be possible to completely remove the interior cover without further disassembly. All yous will be able to do at this point is tilt this interior top cover up for better cleaning access, not completely remove the cover.

Stride 4 Cleaning

With this access, accept a microfiber cloth or can of air and deep clean the console's cooling system. Be very careful with the exposed parts. Make certain zip falls into the area protected by the encompass, every bit you move the system there is plenty space for devious objects (say a small screw) to shift causing damage to your PS4. So what nosotros're trying to say is we would not recommend eating Cheetos while doing this. Once you've put everything back together yous should notice the PS4 fan running quite a chip quieter.

PS4 Pro:

Step 1 Remove the top comprehend

This top cover is designed to exist removed, but it is non easy. You may have to experiment with where putting pressure almost easily allows y'all pull information technology off.

Step two Cleaning

That's it! You have meliorate admission to the fan in this build than the ps4 slim. The heat sink runs parallel to the fan in a different fashion than the other models and requires a decent amount of disassembly to access. If you desire to deep clean downwardly to the estrus sink you're going to accept to interruption down almost the entire console, this guide would be more suited to your needs.

PlayStation has thankfully improved the ease of cleaning with the newer models. We promise this guide helps you lot maintain your panel ensuring it lives a long happy life!