banner



How To Remove Hp Pavilion X360 Battery

Introduction

This guide will help you replace the battery in your HP Pavilion x360 14m-ba114dx laptop. The bombardment is responsible for storing the ability that runs the laptop. If your laptop battery will not charge or your laptop will not power on, at that place may be a problem with your laptop's battery. Please visit this troubleshooting page for possible solutions to the trouble. If none of these solutions work, use this guide to replace the battery.

If yous notice once the laptop is open that the battery is swollen, remove it with caution. If swollen, exercise not accuse the battery, go on the battery at a stable room temperature, and dispose of it properly at a recycling center. This wiki will help you deal with a swollen bombardment.

Also, make sure that y'all unplug your device from whatever external ability sources and completely ability it off before beginning this replacement.

  1. Using a #0 Phillips-head screwdriver, remove the three 5 mm screws along the bottom of the back cover. Using a #0 Phillips-head screwdriver, remove the 6 mm screw at the top of the back cover. Using a #0 Phillips-head screwdriver, remove the 6 mm screw at the top of the back cover.

    • Using a #0 Phillips-head screwdriver, remove the three five mm screws along the bottom of the back cover.

    • Using a #0 Phillips-head screwdriver, remove the 6 mm screw at the top of the back embrace.

  2. Using the flat end of the Spudger, pry up the two rubber feet on the top of the laptop's back cover. Using a #0 Phillips-head screwdriver, remove the 8 mm screw under each of the rubber feet. Using a #0 Phillips-head screwdriver, remove the 8 mm screw under each of the rubber feet.

    • Using the flat end of the Spudger, pry up the two safe feet on the height of the laptop'southward dorsum embrace.

    • Using a #0 Phillips-head screwdriver, remove the viii mm screw under each of the rubber feet.

  3. Open the laptop, with the display fully extended to 360 degrees so that the screen is on the table. In this orientation, sliding the laptop around may scratch the screen. A blanket or a mat placed under the screen will help to prevent scratching. Using the thinner end of an iFixit Plastic Opening Tool,  pry open the keyboard panel from the base of the laptop near the screen hinges.

    • Open the laptop, with the display fully extended to 360 degrees so that the screen is on the table.

    • In this orientation, sliding the laptop around may scratch the screen. A blanket or a mat placed nether the screen will help to forbid scratching.

    • Using the thinner end of an iFixit Plastic Opening Tool, pry open the keyboard panel from the base of operations of the laptop near the screen hinges.

  4. Using the iFixit Plastic Opening Tool and the iFixit Opening Picks, work your way around the rest of the keyboard and pry it out of the base. Using the iFixit Plastic Opening Tool and the iFixit Opening Picks, work your way around the rest of the keyboard and pry it out of the base. Using the iFixit Plastic Opening Tool and the iFixit Opening Picks, work your way around the rest of the keyboard and pry it out of the base.

    • Using the iFixit Plastic Opening Tool and the iFixit Opening Picks, work your way around the rest of the keyboard and pry information technology out of the base of operations.

  5. Grasp the keyboard with both hands and gently lift it out of the base.

    • Grasp the keyboard with both hands and gently lift it out of the base.

    • Exercise not elevator the keyboard completely out of the base of operations, as there are ZIF connectors that must be removed kickoff.

  6. Using a plastic Spudger, remove the ZIF connectors that attach the motherboard to the touchpad and the keyboard. Use the flat end of the Spudger to pop up the cap on top of the connector. The connector will then slide out of place. Repeat this step for all three connectors. Repeat this step for all three connectors.

    • Using a plastic Spudger, remove the ZIF connectors that adhere the motherboard to the touchpad and the keyboard. Employ the flat end of the Spudger to pop up the cap on height of the connector. The connector volition then slide out of identify.

    • Repeat this step for all three connectors.

  7. Using the flat end of the plastic Spudger, remove the ZIF connector attaching the volume button and headphone jack to the motherboard. This ZIF ribbon is glued to the middle of the battery. You do not need to separate this ribbon from the battery in order to remove the battery from the device. You only need to unclip it at both ends.

    • Using the flat stop of the plastic Spudger, remove the ZIF connector attaching the volume button and headphone jack to the motherboard.

    • This ZIF ribbon is glued to the eye of the battery. You practise not demand to separate this ribbon from the battery in order to remove the bombardment from the device. You but need to unclip it at both ends.

  8. Using a #1 Phillips-head screwdriver, remove the seven 4 mm screws around the battery. Gently move the ZIF connector out of the way to reach the screw marked in orange. Then use the #1 Phillips-head screwdriver to unscrew it.

    • Using a #1 Phillips-caput screwdriver, remove the vii 4 mm screws effectually the battery.

    • Gently move the ZIF connector out of the style to reach the screw marked in orange. Then use the #one Phillips-head screwdriver to unscrew it.

  9. Using the thin end of the iFixit Plastic Opening Tool, pry the battery out of its place inside the laptop's base. Next, use your fingers to pull the battery out of its position. Next, use your fingers to pull the battery out of its position.

    • Using the thin cease of the iFixit Plastic Opening Tool, pry the battery out of its place within the laptop'due south base.

    • Side by side, apply your fingers to pull the battery out of its position.

Decision

To reassemble your device, follow these instructions in opposite order.

Team

Embed this guide

Choose a size and copy the code below to embed this guide as a minor widget on your site / forum.

Preview

Source: https://www.ifixit.com/Guide/HP+Pavilion+x360+14m-ba114dx+Battery+Replacement/130455

0 Response to "How To Remove Hp Pavilion X360 Battery"

Post a Comment

Iklan Atas Artikel

Iklan Tengah Artikel 1

Iklan Tengah Artikel 2

Iklan Bawah Artikel